What Size Trucks For 8 Deck Reddit

“for an 8.25 board, you should only buy 8.25 or 8.0 trucks, not 8.5 because when your trucks are larger than your board your wheels will stick out, causing you to trip and eat shit, plus it makes all tricks harder because you can’t scoop.” They must be selected for an 8.0 deck or another size worthily.

Olaraga1010 - Paket Fullset Skateboards Import Shopee Indonesia

7.75 to 8.25 137mm / 5.25 203mm / 8 139:

What size trucks for 8 deck reddit. Some truck brands also measure the width of their truck from axle nut to axle nut, while others measure just the width of the hanger. Width is influenced by the size of the rider and the type of riding. The truck and deck size chart above is a general guideline based off common sizes found here at tactics.

Street skaters usually choose a smaller deck. Our recommendation for the riders who are taller than 5 feet 6 inches, is up to 8.50 skateboard decks. 139 indys or 149 indys.

I would get 8,0 trucks, i prefer them a bit smaller but it really doesnt matter too much. 7.5 to 7.75 127mm / 5 193mm / 7.6 129: Bigger riders and those skating ramps typically prefer a wider deck.

Here are some general guidelines: Choosing the best skateboard trucks for your setup can be somewhat challenging as skate decks are measured in inches, while trucks are measured using a variety of units that vary by brand. Choose your skateboard deck according to the width, not length.

The more you progress, the more you will want to customize your setup to meet your own skating. All have sizes between 8 and 8.5. I started w/ 8.25 and 8.5 trucks way too stiff then tried 8.0 trucks and it was good and carvy but still too big for tech.

Most truck companies make sizes between 8 and 8.5: Some people actually like trucks that don’t match their board size. 8.25 to 8.75 149mm / 6 215mm / 8.5 149:

They work as the goldilocks truck for 8.25 and give you wiggle room to set up boards from 8.0 to 8.5, no sweat. The axles shouldn’t stick out and your deck shouldn’t be wider than your trucks. I skate most street to walk around my neighborhood (bad condition asphalts unfortunately) but sometimes (rarely, actually) i go to the park and try to land some tricks (still only can ollie, shoveit and rock to fakie)

8.75 to 9.75 160mm / 6.3. Just this year up i sized up on deck , which leads me to a 8.25 deck.but ive realized that i snap decks like hell when i use 149. In the end, what you want is a truck that, when mounted.

Tensor, silver, ace, mini logo, theeve. Now, it doesn’t really matter if they don’t match your deck perfectly. Trucks are usually just the tiniest bit smaller than the deck so it’ll still fit well.

All the charts say that you can use both sizes of trucks on 8. I've tried 149's on everything from 8.0 to 8.5, and anything smaller than 8.375 i go with the 139's. So schould i use 149mm indys for a 8.5 or juss keep.

Saw some people say its better to get a 139mm, others saying that 129mm works just fine. Choose the former if you might size down as far as 7.75 in the future or the latter if you think you might size up as far as 8.75. I can't do trucks being more than.1 bigger than my board, the wheel bite seems to be much worse with the wider trucks.

But when i use 139mm for 8.25 its juss fine. Independent trucks sizing chart including universal sizing comparison, axle lengths, and suggested sizing for deck widths. Either 139 or 149 independents work fine, too.

Free shipping au • $29.95 worldwide online 24/7 • click & collect • dispatch daily It is a guideline of standard sizes and different dimensions since every individual prefers different setups on their caliber and style of skating. The stage 11 hollow is the lighter version of the standard truck (7% lighter), it’s hard to give an exact number because trucks vary in sizes.

Honestly though new trucks can be kind of costly and you'll probably be fine running them slightly too small in this case, like that's 0.065 inches of difference on each side so it's not like the size difference is big, like if u were rocking an 8 and wanted to switch to a 9 i'd recommend sizing up but for that change a lot of people will just use 8.25 trucks, it sometimes gives it kind of a. Note that more expensive tools have more layers of material, which makes them stronger. Everyone skates different and prefers different setups based on their style and caliber of skating.

If your height is up to 4 feet 6 inches or less than it, then we will recommend you to choose the board from 7.25 up to 7.75. For 7.75 skateboard deck and above, your height should be up to 5 feet 6 inches. There are different deck widths from 7.4″ to more than 8.5″.

Im having a hard time deciding on which ones to get for the board. The reduced weight mainly comes from the hollow axle and hollow kingpin. What size trucks should i get for a 8.0 deck?

Make sure the trucks you pick are the right size for your deck. I had a question of what trucks and wheel size i should get for a size 8.375 deck. 8.125 is perfect for 8.0 trucks , but as far as more room we are talking 1/8th of an inch that's 1/16th per side.

109, 129, 139, 144, 149, 159, 169, 215 (check the table for reference) stage 11 hollow. But it won’t be any biggie because it’s 1/8th of an inch we’re talking here lol. Well ova the past year ive been skating independent trucks 139mm on size 8.0 decks and 7.75.

Any help would be appreciated thanks. For example, there are a lot of false comments that sound something like this: Having a skateboard truck size chart is the most appropriate way of matching the stake and deck widths of your truck.

Wheelbite is what happens when your wheels touch your board, it’s like.

Are These Trucks Ok For An 8 Deck Rnewskaters